Midlands PT Cruiser Owners Club
Would you like to react to this message? Create an account in a few clicks or log in to continue.

PT Cruiser Codes 0032 and 0038 - Require Help

2 posters

Go down

PT Cruiser Codes 0032 and 0038 - Require Help Empty PT Cruiser Codes 0032 and 0038 - Require Help

Post  miiky Sat Jun 27, 2015 2:40 pm

Hi there I have recently bought a PT 2.0 LTD 2004 cruiser. I am getting the codes 0032 and 0038 come up randomly. It will stall also when engine light comes on or shorlty after. Can take a while to happen but sometimes within a few minutes. I have a related fault were once the fault codes appear and before stalling. The mileometer ticks up stationary. Ive done about 150+ miles sat on the drive. Ive noted also a pop pop pop sound from what I think is the carb just before meltdown. Cant see why mileometer is affected. Recently I have found the on the black plug there is a PCI wire. If cut the milometer problem goes away. Sadly car wont start without this but it does seem to say its something from some device that is on the PCI bus.

REALLY NEED URGENT INPUT PLEASE


Thanks.

miiky

Posts : 1
Join date : 2015-06-27

Back to top Go down

PT Cruiser Codes 0032 and 0038 - Require Help Empty Re: PT Cruiser Codes 0032 and 0038 - Require Help

Post  Admin Sun Jun 28, 2015 6:27 pm

Both codes point towards the oxygen sensors, the Cruiser has 2 of them, not sure what the milometer has a mind of it's own though, try removing the battery negative terminal for a few minutes, and see if that get's rid of your problems, otherwise it could be a broken wire to the sensors or the sensor itself has gone bad.

PT Cruiser Codes 0032 and 0038 - Require Help 2011-05-29_182506_2_zpsqz84xgee

PT Cruiser Codes 0032 and 0038 - Require Help 2011-05-29_182457_1_zpscvyw2s6r

Admin
Admin

Posts : 48
Join date : 2008-09-23

https://midlands-pt-cruisers.forumotion.com

Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum